Home › Speed Bumps, Curbs, and Asphalt Accessories
Control traffic and define spaces with speed bump installation in Kissimmee, FL. We install asphalt speed humps, curbs, wheel stops, and other accessories to improve safety and organization. Our team designs layouts that slow vehicles where needed and protect buildings, landscaping, and pedestrians.
Precision Asphalt Kissimmee provides professional speed bump installation throughout Kissimmee, FL, Florida and the surrounding area. Our licensed, insured crew delivers safe, clean, on-time work with a free estimate before anything begins. Call (407) 565-9096 or request your free quote.
Practical traffic control for Kissimmee properties
Speed bumps, curbs, and other asphalt accessories are about controlling how people actually drive and park on your property, not just checking a box on an insurance form. At Precision Asphalt Kissimmee, we design each layout around how your traffic moves right now and how you want it to move.
For speed bump installation, we look at your entrance speeds, blind corners, crosswalk locations, and where vehicles tend to cut across parking spaces. In many Kissimmee lots, that includes routes near school pickup areas, tourist traffic heading to short term rentals, and delivery truck paths. We usually walk the site with you, watch traffic when possible, and mark proposed locations in field paint so you can see the impact before any asphalt is placed.
Curbs and accessories are handled the same way. We plan where you need to stop cars from rolling into landscaping, block access to fire lanes, or keep vehicles away from drainage inlets. The design work up front is what prevents you from ending up with speed bumps that drivers hate or curbs that the fire marshal asks you to remove. Our goal is a layout that slows drivers where it matters, keeps emergency access open, and still lets your customers or residents move through the property without frustration.
How our speed bump installation process works
The actual speed bump installation is straightforward when it is done correctly, and it starts with the condition of your existing pavement. Precision Asphalt Kissimmee inspects for cracks, weak edges, and ponding water around the proposed bump locations. If the asphalt is badly cracked or the base is soft, we address that first so the bump does not break apart or sink after a few seasonal rain cycles.
Once locations are confirmed, we saw cut or mill the pavement where needed so the new bump ties in cleanly instead of just sitting on top like a loose lump. For most commercial lots in Kissimmee, we install asphalt speed humps 3 to 4 inches high with gradual tapers that are friendly to passenger cars but still effective. For private drives or HOA roads, we can adjust the profile based on your speed target and what types of vehicles use the road.
We use hot mix asphalt from local central Florida plants, compacted in layers with a roller or plate compactor depending on access. After compaction, we check for smooth transitions and make sure there are no sharp edges that could catch a low bumper. In heavy traffic areas, we add a tack coat between the old asphalt and the new material so the bump bonds tightly. Once the asphalt has cooled and set, we return for striping and signage so the bump is visible in both daylight and rain.
If you have active businesses on site, we usually phase the work, closing only a section of the lot at a time and scheduling the noisiest work during slower hours. That helps you keep your doors open while we build in the traffic control you need.
Curbs, wheel stops, and asphalt accessories that actually hold up
Curbs and accessories do two jobs on your property: they direct traffic and protect everything that is not pavement. Precision Asphalt Kissimmee installs both poured in place concrete curbs and pre-cast accessories, and the right choice depends on how your site drains, what your budget is, and how often you expect vehicles or delivery trucks to hit them.
For new curbing, we set forms to establish height and alignment, then pour a concrete mix suited for central Florida heat and afternoon storm cycles. Proper steel reinforcement and expansion joints help keep curbs from cracking and separating as the pavement moves. Where curbs tie into existing asphalt, we clean and tack the joint area so water does not seep through and undermine your pavement edge, which is a common failure point in Kissimmee lots.
Wheel stops, bollards, and protective islands are planned around your building entrances, storefront glass, and accessible parking spaces. We drill and anchor pre-cast wheel stops into the pavement, seal the anchors to reduce water intrusion, and set bollards deep enough with concrete fill so a light impact bends the vehicle bumper, not the post. For properties with frequent truck traffic, like small distribution yards or grocery stores, we might recommend heavier duty stops or reinforced concrete curbs instead of lightweight blocks that move every time they are bumped.
Other asphalt accessories, such as raised crosswalks, rumble strips, and traffic islands, are built with the same focus on drainage and durability. We shape these features so stormwater still flows to inlets and does not pond against the new construction. Finished work is then striped and marked to meet visibility expectations for drivers who may be unfamiliar with your property, such as tourists and short term visitors common in the Kissimmee area.
What affects cost and timing in Kissimmee
Property owners in Kissimmee often ask why one speed bump or curb job costs more than another. The main cost drivers are condition of the existing pavement, number of locations, access for equipment, and whether we are tying into drainage and striping work.
If your lot is newer and the asphalt is sound, we can typically install speed bumps and curbs on top of the existing surface with minimal base repair, which keeps costs down. Older lots with wide cracking or alligator areas often need patching before we can build anything on top. That added work is what prevents a new bump from simply following the same cracks and crumbling within a year or two.
Access is another big factor. Open shopping center lots are usually less expensive to work in than tight condo communities with cars parked in every space. If we need to hand carry mix, work in shorter windows because of quiet hours, or phase around constant traffic, labor time goes up. In many Kissimmee HOAs and apartment communities, we work with property managers to schedule temporary parking relocations so we can work more efficiently and save on costs.
Timing is affected by weather and material availability. Afternoon storms are routine in Osceola County, so we often plan speed bump installation for early in the day so the asphalt has time to cool and cure before rain hits. For larger projects that combine new paving, curbs, and accessories, we break the work into stages: base and repairs first, then curbs and islands, then speed bumps, and finally striping and signage. This sequencing keeps your site functional and reduces the risk of damage to fresh work.
Local rules, safety considerations, and how to get started
Before we install speed bumps on a shared access road or a private street that ties into a public route, we confirm what the governing rules are. In the Kissimmee area, that often means checking with the HOA board, the property management company, and sometimes the city or Osceola County if the road is dedicated or if emergency services have specific requirements.
Emergency access is critical. Speed bumps that are too tall or placed too close together can slow fire trucks and ambulances. At Precision Asphalt Kissimmee, we space bumps to keep average speeds in check without creating an obstacle course. For some properties, especially where fire departments have guidelines, we may recommend speed humps or raised crosswalks with longer tapers instead of short, harsh bumps.
Visibility and compliance with ADA considerations also matter. Any bump or raised element near accessible parking or a pedestrian route needs clear markings, paint with glass beads for night visibility, and correct slopes where pedestrians cross. We match striping colors and symbols to your existing layout, and where needed we refresh older markings so everything looks intentional and clear.
To get started, most property owners simply share a few photos, a basic site plan if available, and a note describing the problems they are trying to solve, such as speeding in a particular lane or cars cutting through a drive through loop. We follow up with a site visit, suggest specific locations and profiles, and provide a written scope that spells out how many bumps, what type of curbing, how the work will be phased, and any related repairs. That way you know exactly what Precision Asphalt Kissimmee will deliver before a crew arrives on site.
